Find out about our projects
It is a reprocessing plant of used nuclear fuel. This factory has a capacity to handle the annual fuels used from 80 to 100 nuclear reactors (1700 tons). 95 % of the uranium will be redeemed and reused.
The reactor EPR ™ is the first reactor of Génération III +, under construction, of the French nuclear park and the 100th reactor commanded Areva. Flamanville 3 joins in a program of nuclear revival to renew the existing power plants before 2020. The accent was put on the environment and the safety (security): there will be no rejection(discharge) of CO2 in the atmosphere and an installation of four parallel and separate systems of protection(saving) is planned.
The project consists in the regeneration of the bridge – rail of Resses implanted on the railroad line of Culoz-Modane. It is about a replacement of the existing decks because the latter showed numerous pathologies during the visits. The new decks will have an impact on the increase of the load applied at the level of the foundation. The strengthening of the central pile and the existing veered astern are thus necessary.
It is a project of solar station installed in the desert of Negev in Israel. The maximum capacity of the station will be 250 MW that is 2,5 % of the consumption of the country. This project will combine 3 types of energies: solar, photovoltaic, and the natural gas. This solar station will be 5th the biggest of the world, it start-up is estimated in 2017.
Situated in Russia, the Yamal LNG project gives access to the immense gas resources of the Russian Arctic. It plans the drilling of more than 200 wells, 3 trains of LNG of a capacity of 5,5 million tons each, and the start-up of 16 methane carriers icebreaker of a capacity of 170 000 m3 each. The yards of construction are located in China, in the Philippines and in Malesia.
Situated 35 km away from Oran, this project is a thermal power plant located in Boutlelis. This power plant will be equipped with 2 gas turbines in open cycle and will have a production capacity of 445 MW.
Martin Linge project is located in approximately 180 km on the West by Bergen (Norway), by a depth of 115 meter water. Martin Linge will consist of a jacket and a FPSO. Wells will be drilled by a mobile jack-up. The installation will be fed from the shore.
It is the first construction of a reactor EPR of generation III + on the site of Olkiluoto. Its net electric power is of 1600 MW. The innovation of this project is based around new nuclear technologies, the sustainable development and an important objective of safety.
It is a oil field production that is located in approximately 250 km of the coast of Angola.
This project consists of the installation of two FPSO units. The project includes the conversion of two tankers in FPSO as well as the installation and the maintenance of these two units.
The project should be finished by 2017.
It is a project of subsea installation of a FPSO unit. The project is located in 130 km off coast by a depth of 1 750 m.
It is based on a system of submarine production connected to a FPSO designed to handle 200 000 b/j and store 2,3 million barrels.
The project includes the installation of a FPSO unit as well as all the submarine pipelines, risers and umbilical.
Length of 488 m for a width of 74 m, the future FLNG will be anchored in the middle of the sea , 200 km away from the northwest of Australia, by a depth of water about 240 m. Prelude will produce some gas from the offshore fields and will liquefy it directly on board by cooling. This liquefied natural gas (GNL) will be transshipped on specialized ships.
Areva builds two reactors EPR ™ on the site of Taishan in the province of Guangdong, in China. It is the most important commercial contract signed in the history of the civil nuclear energy.
- Uranium Treatment Plant
- ERP Flammanville 3
- Bridge Rail
- Martin Linge
- EPR Taishan